Capacity 300cbm per day bagasse based particle board production line
Drum chipper machine
Glue Blender machine
Belt conveyor for mat boards
loader for mat-boards
Hot press machine
Unloader for finished board
Edge saw machine
1.Wood shavings preparation Section.
Short and long logs of small diameter are fed into long-log flaker by the feeding conveyor, which sliced into qualified shavings at once, then the flakes will be sent to wet flake bin. As for short branches and other materials, what will be sent to feeding belt conveyor of drum chipper. Raw material are whittled to qualified chips by chipper, then wind send these to wood bin as intermediate storage. Wood chips then pass the ring flakers to be qualified wood shavings, and will be sent to the wet flake bin by wind.
2.Drying and sieving section.
The flakes discharged from the wet flake bin are conveyed to the rotor dryer through screw conveyor. Qualified flakes are screened in screening machine. Screw conveyor of dryer is equipped with spark detection devices,once alarms, dry materials will be discharged outside the system automatically. Qualified core flakes are stored in core flake bin; oversize flakes will resent to mill to be re-crushed, and transported to surface flake bin.
3.Glue mixing and applying section.
This section includes the wax emulsion and hardener solvent’s preparation and transportation, additive storage and glue mixing and spreading system. After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue mixers respectively.
4. Forming and hot-pressing section.
The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of mental remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet.
5. Cooling and sizing section.
The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.
6. Sanding section.
The storage board are sended into sanding system(include hydraulic lifters, roller conveyors, wide belt sander). Then sanded,checked and stored.
Packaging & Shipping
Founded in year of 1993, LINYI SHUNKAI INTERNATIONAL TRADING CO,.LTD now is one of the professional wood-based panel machinery manufacturers in China. 25 years’ hard work and innovation, RUIFENG becomes to the most reliable brand in domestic market. We do produce all kinds of wood machinery, especially the Forming machine, Cold press, Hot Press, Dryer as well as other machines. And we are capable to produce whole production lines like OSB Line, MDF/HLD Line, Particle Board Line, Block Board Line as well as Plywood Line. We successfully installed wholes lines in Russia, Uzbekistan, Vietnam, Ethiopia as well as other countries.
We have Engineering team to make layout design for customers and to supply reasonable solutions according to request like the raw materials, the designed annual output, the environment policy as well as other facts. And we have Technician team to supply customers professional after-sales service like overseas installation, worker’s training, equipment adjustment and equipment maintenance.
From domestic market to overseas market, Shunkai grows up to be stronger and will be much more stronger in the cooperation with more and more customers all over the world.